Fujitsu IP-9610 ASA, USABLE DETACHABLE POWER SUPPLY CABLE SET

Chapter 2 Installation and Connection

USABLE DETACHABLE POWER SUPPLY CABLE SET

MODEL	Input	Connector	Cord	Attachment Plug cap
North	100-	IEC C-13	Type SJT, No.16 AWG Min.	NEMA (5-15P)
America	120V	Rated 13A, 125V	3-Conductors	parallel blade
<*1>		UL, CSA Approved	(Single phase;2-current carrying	Rated 13A, 125V
<*2>			conductors & ground)	UL, CSA Approved
			UL, CSA Approved
	200-	IEC C-13	Type SJT, No.14 AWG Min.	NEMA (6-15P)
	240V	Rated 15A, 250V	3-Conductors	tandem blade
		UL, CSA Approved	(Single phase; 2-current carrying	Rated 15 A, 250 V
			conductors & ground)	UL, CSA Approved
			UL, CSA Approved
Europe	100-	IEC C-13	CENELEC OC	Rated 10 A, 250 V
<*2>	240V	Rated 10A, 250V	3X1.0 square mm<*1>	<*1>
		<*1>	<HAR>
Aus-	100-	IEC C-13	Cable: AS OD 3 X1.0 square mm	Rated 10 A, 250 V
tralia	240V	Rated 10A,	e.g.
		250V
U.K	100-	IEC C-13	BS OC 3 X1.00 square mm	Rated 10 A. 250 V
<*2>	240V	Rated 10A,
		250V		ASA	or
Japan	100V	IEC C-13	Type HVCTF cross section area	NEMA (5-15P)
		Rated 13A,	1.25 square mm	parallel blade
		125V	3-Conductors	Rated 13 A, 125 V
			(Single phase;2-current
			carrying conductors & ground)
		METI Approved	METI Approved	METI Approved
		PS or <PSE>	PS or <PSE>	PS	or <PSE>
		E	E	E
Korea	220V	IEC 60320-1	Comply with KSC3304.	Comply with KSC8305.
	(Class I)	(IEC C-13)	Type VCTF cross section area 1.25	Rated 12A, 250V
		Rated 12A, 250V	(0.50 or 1.00 or 2.00) square mm
			3-Conductors
			(Single phase;2-current
			carrying conductors & ground)

220V	IEC 60320-1	Comply with KSC3304.	Comply with KSC8305.
(Class II)	(IEC C-13)	Type VCTFK cross section area	Rated 12A, 250V
	Rated 3A, 250V	1.25 (0.50 or 0.75 or 1.00 or 2.00)
		square mm
		2-Conductors

Note: *l. Be sure that the detachable proper Supply cord has the approval of the appropriate safety agencies of the country where the equipment will be used.

*2. Cable length of above Power Supply cord shall be shorter than 4.5 m.

IP-9610

20