Chapter 2 Installation and Connection

2.7Connection to Voice

2.7Communication (Intercom)

Connection to the Voice Communication (Intercom)

For voice communication between IP-9610, there is one voice terminal to connect the voice communication device (e.g., intercom).

Connect to VOICE terminal on the front panel of IP-9610 using the dedicated adaptor cable with the bidirectional voice communication terminal (RJ25 – XLR). The impedance is terminated in 600Ω. There are two types of the cables. Procure the appropriate type separately because this cable is not attached to IP-9610. For more information, see Section 4.2, "Cable and Connector Details."

NOTE: For details about connectors and cables, see Section 4.2, “Cable and Connector Details.” For electrical specifications, see Appendix 2.3, “Function Specifications.”

Figure Connection to voice communication device

IP-9610

27