Fujitsu IP-9610 G: Green, O: Orange, R: Red

						Appendix
LED name		ON		Blinking	OFF	Remarks
PWR	G	Power ON		---	Power OFF
RDY	G	Normal operation		Starting up	Software inactive	Blink interval: 0.5s
	O	Maintenance mode		Maintenance mode		Maintenance mode
		LAN1		starting up		(Cancel button
		(IP=10.0.0.1)				startup):
		LAN2				LAN subnet mask
		(IP=10.0.0.2)				(255.0.0.0)
		CONSOLE				CONSOLE subnet
		(IP=192.168.255.253)				mask
						(255.255.255.252)
ALM	R	Equipment alarm		Equipment alarm	Normal operation	When the device
						alarm is generated, a
						part of alarm can be
						changed to lighting,
						blinking, and turning
						off by the setting.
IN DWN	O	Video/Audio/Network		Video/Audio/Network	Normal operation	The alarm display by
		input down/fault		input down/fault		this LED can select
						lighting, blinking,
						and turning off
						excluding the LED
						lighting by the
						temperature anomaly.
LINK/ACT	G	LINK established		LAN packets detection	Cable disconnection
[LAN1]
100M/1000M	G	100BASE operation		1000BASE operation	10BASE operation
[LAN1]
LINK/ACT	G	LINK established		LAN packets detection	Cable disconnection
[LAN2]
100M/1000M	G	100BASE operation		1000BASE operation	10BASE operation
[LAN2]
LINK/ACT	G	LINK established		LAN packets detection	Cable disconnection
[CONSOLE]
100M/1000M	G	100BASE operation		1000BASE operation	10BASE operation
[CONSOLE]
G: Green, O: Orange, R: Red
Name		Button type	Specifications		Behavior
POWER	Locker button		Power ON/OFF

IP-9610

61