Chapter 2 Installation and Connection

2.5Connection to RS-232C/RS-422

2.5Device

The [SERIAL] connector of IP-9610 is the RS-232C or RS-422 communication terminal (switchable). The terminal of IP-9610 is the D-sub 9 pins (male) . The specification of RS-232C operating mode is DTE. Use a cross connection or straight cable corresponding to the connected device. See Section 4.2, “Cable and Connector Details.”

The figure below shows the connection method.

NOTE: For details about connectors and cables, see Section 4.2, “Cable and Connector Details.” For electrical specifications, see Appendix 2.3, “Function Specifications.”

Figure Connection to RS-232C or RS-422 input/output device

IP-9610

25