Chapter 5 Troubleshooting
No. | Class | Status | Description | Recommended action | |
|
|
|
|
| |
9. |
| The LINK/ACT | Is the power to the communication | Verify the power supply and operation of | |
| destination device turned on? | the communication destination device. | |||
|
| ||||
|
| LED for the |
|
|
|
|
|
| If the LINK LEDs are not ON, the LAN | ||
10. |
| LAN port is not | Are the LINK LEDs on this device | ||
| turned on. | and the hub turned on? | cable is not connected. Connect the LAN | ||
|
|
| cable correctly. |
| |
|
|
|
|
| |
11. |
|
| Is the IP address specified from the | Specify a correct IP address | from the Web |
|
| Web browser correct? | browser on the control terminal. | ||
|
|
| |||
|
|
|
|
| |
|
|
|
| Make correct settings by referring to the PC | |
|
|
|
| user's guide and OS handbook. If this | |
12. | Line |
| Are the network settings (IP | device is started with the default settings | |
| address, subnet mask, etc.) on the | made before shipment from the factory, see | |||
|
|
| control terminal PC correct? | "Section 3.4, " Special Use of CANCEL | |
|
| Device setting |
| Key," for the network settings for the | |
|
|
| control terminal PC. |
| |
|
| through a LAN |
|
| |
|
| is disabled. |
| If a reply is not received, turn on the power | |
|
|
|
| to the device while holding down the | |
|
|
| Is a reply received in response to a | Cancel key to start the system with the | |
13. |
|
| default IP address (10.0.0.1) set before | ||
|
| PING command issued to the IP | shipment from the factory. | Confirm the IP | |
|
|
| address of the device? | address. If the problem persists, check the | |
|
|
|
| status on the LAN. For information on | |
|
|
|
| this startup procedure, see Section 3.4, | |
|
|
|
| "Special Use of CANCEL Key." | |
|
|
|
|
|
|
48