Chapter 2 Installation and Connection

2.62.6 Connection to Network

To connect IP-9610 to a LAN device, connect the LAN device to the LAN communication port [CONSOLE/LAN1/LAN2] of IP-9610 using a LAN cable (UTP cable). The LAN communication port specification of IP-9610 is 10BASE-T/100BASE-TX /1000BASE-T for CONSOLE, LAN1 and LAN2.

The figure below shows the connection method.

NOTE: For details about connectors and cables, see Section 4.2, “Cable and Connector Details.” For electrical specifications, see Appendix 2.3, “Function Specifications.”

NETWORK/CONSOLE

CONSOLE

HUB, Router, etc

Client PC

Figure Connection to network

CAUTION

Please do not provision the IP address below.

LAN/Console ports;

・IP address commonly unused（0.0.0.0，255.255.255.255，etc…）

・Loop back address (127.xxx.xxx.xxx)

・Class D and Class E addresses

・IP address already used

Console port only;

･IP address (169.254.xxx.xxx) used when LAN port cannot obtain IP address normally from DHCP server.

For more information, see IP-9610 Software User’s Guide.

IP-9610

26