Chapter 2 Installation and Connection

2.42.4 Connection to DVB-ASI Device

This section describes how to connect with the DVB-ASI device.

2.4.1 Connection to DVB-ASI Input Device

When IP-9610 operates with the encoder mode, the BNC cable is connected to DVB-ASI OUT as shown in the figure below.

NOTE: For details about connectors and cables, see Section 4.2, “Cable and Connector Details.”

For electrical specifications, see Appendix 2.3, “Function Specifications.”

1

3

2

4

ＤＶＢ－ＡＳＩ input deviceFigure Connection to DVB-ASI input device

IP-9610

23