Fujitsu IP-9610 100-240VAC, Possibility of damage to the device, Possibility of electric shock, fire, and damage to the device

Chapter 2 Installation and Connection

CERTIFICATION MARKING

Country Agency Certification Mark

Austria OVE

Belgium CEBEC

Denmark DEMKO

Finland FEI

France UTE

Germany VDE DVE

Country Agency Certification Mark

ItalyIMQ

Norway NEMKO

Spain AEE

Sweden SEMKO

Switzerland SEV

Possibility of electric shock, fire, and damage to the device

Always observe the precautions given below.

This indicates a hazardous situation that could lead to electric shock, fire, or damage to the device.

Always connect the power cord to a power receptacle for the standard two-prong plug with ground.

Use a power receptacle with a capacity of 1A or more. When using a power extension cable, be sure that the total power consumption of all devices connected to the cable does not exceed the rated capacity of the cable. If the power receptacle capacity is low, or power consumption exceeds the rated value, the power cord or power wiring may overheat and start a fire.

Possibility of damage to the device

Do not turn on the device until connection of peripheral devices is completed. Otherwise, the device may be damaged.

100-240 VAC

Using a power cord with the standard two-prong plug with ground, connect IP-9610 to 100-240 VAC outlet.

Provide a power receptacle for the standard two-prong plug with ground.

IP-9610

21