Fujitsu IP-9610 4.14.1 Installation Preparations, A type of IP-9610 installation work is shown below

Chapter 4 Cable specifications

4.14.1 Installation Preparations

A type of IP-961 0 installation work is shown below.

IP-9610			External device
		BNC
			(1) Coaxial cable		DVB-ASI output device
		BNC
			(2) Coaxial cable		DVB-ASI input device
		BNC
			(3) Coaxial cable		DVB-ASI input device
		BNC
			(4) Coaxial cable		Reference clock source
		BNC
			(5) Coaxial cable		Reference clock source
		D-sub9
			(6) RS-232C cable		Device with RS-232C interface
		D-sub9
			(7) RS-232C cable
					Device with RS-232C interface
	(8)Audio adapter cable			XLR
					Analog audio output device
					(mic, etc)
		RJ25		XLR
					Analog audio input device
					(speaker, etc)
		RJ45
			(9) LAN cable		Device with LAN interface (HUB, etc)
		RJ45
			(10) LAN cable		Device with LAN interface (HUB, etc)
		RJ45
			(11) LAN cable		Device with LAN interface (HUB, etc)
			(12) Power cable
					Power source 100-240VAC
			(separate order)

Cables are depended on the option board.

Please refer user's guide of each option board.

When constructing a system that uses IP-9610, consideration must be given so that its boundary between IP-9610 and other devices is similar to that shown in the above figure. Since the type of work may change depending on the system, procure equipment and perform work based on consultations with a system designer.

IP-9610

37