Chapter 3 Operation instructions

3.3 Device Settings and Operation

3.3

(Front Panel)

The IP-9610 has six control keys: [U], [V], [Y], [Z], [Enter], [Cancel], [F1], [F2], [F3] and [F4]. Use these keys for making settings.

The VFD panel displays of 4 lines, 24 characters per line.

See Software User’s Guide for the procedure of the software installation and the each setting.

Front Control Panel

■Function description of each key

Functions of [U] and [V] keys

-Each key changes the menu items or setting items displayed on the VFD panel.

-The displayed item changes each time either key is pressed. [U] and [V] change items in the opposite direction.

Functions of [Y] and [Z] keys

-Each key moves the cursor displayed on the VFD panel to the left or right.

-The cursor moves one column each time either key is pressed.

[Enter] key

-Pressing the [Enter] key while the maintenance initial page is displayed proceeds to the maintenance menu page.

-Pressing the [Enter] key on the maintenance menu page allows you to make settings for status display and shutdown.

[Cancel] key

-Pressing the [Cancel] key while the maintenance menu page is displayed proceeds to the maintenance initial page. Pressing the [Cancel] key on the setting item selection page returns to the page displayed immediately before you pressed the [Enter] key.

[F1]～[F4] key

-Short cut key to any menu location. By pressing the [F1]～[F4] key, menu location can be changed to registered location. By pressing the [F1]～[F4] key for a while under the menu location that customer want to register, that menu location will be registered.

Other

-If you do not make any key input for 60 seconds on any page, the current page proceeds to the maintenance initial page.

IP-9610

33