Chapter 2 Installation and Connection

2.32.3 Connection to External Sync(REF)

There is each of input and output interfaces for connection to the external sync (REF).

REF input

Connect incoming external sync to REF IN by using coaxial cable with BNC connector. The signal is terminated in 75 ohm.

REF OUT

Connect coaxial cable with BNC connector to REF OUT for outgoing external sync signal. The signal is output in 75 ohm.

NOTE: For details about connectors and cables, see Section 4.2, “Cable and Connector Details.” For electrical specifications, see Appendix 2.3, “Function Specifications.”

Figure Connection to External Sync input, output devices

IP-9610

22