5.3 | Protocol for command abort | 5 | - 69 |
5.4 | WRITE SECTOR(S) command protocol | 5 | - 70 |
5.5 | Protocol for the command execution without data transfer | 5 | - 71 |
5.6 | Normal DMA data transfer | 5 | - 73 |
5.7 | Ultra DMA termination with | 5 | - 84 |
5.8 | PIO data transfer timing | 5 | - 85 |
5.9 | Multiword DMA data transfer timing (mode 2) | 5 | - 86 |
5.10 | Initiating an Ultra DMA data in burst | 5 | - 87 |
5.11 | Sustained Ultra DMA data in burst | 5 | - 90 |
5.12 | Host pausing an Ultra DMA data in burst | 5 | - 91 |
5.13 | Device terminating an Ultra DMA data in burst | 5 | - 92 |
5.14 | Host terminating an Ultra DMA data in burst | 5 | - 93 |
5.15 | Initiating an Ultra DMA data out burst | 5 | - 94 |
5.16 | Sustained Ultra DMA data out burst | 5 | - 95 |
5.17 | Device pausing an Ultra DMA data out burst | 5 | - 96 |
5.18 | Host terminating an Ultra DMA data out burst | 5 | - 97 |
5.19 | Device terminating an Ultra DMA data out burst | 5 | - 98 |
5.20 | 5 | - 99 | |
6.1 | Response to | 6 | - 2 |
6.2 | Response to hardware reset | 6 | - 3 |
6.3 | Response to software reset | 6 | - 4 |
6.4 | Response to diagnostic command | 6 | - 5 |
6.5 | Address translation (example in CHS mode) | 6 | - 7 |
6.6 | Address translation (example in LBA mode) | 6 | - 8 |
6.7 | Sector slip processing | 6 | - 11 |
6.8 | Alternate cylinder assignment | 6 | - 12 |
6.9 | Data buffer configuration | 6 | - 13 |
xii |
