Fujitsu P2000 manual Shutdown and Startup Problems, Video Problems

		T r o u b l e s h o o t i n g
Problem	Possible Cause	Possible Solutions
Shutdown and Startup Problems
The Suspend/Resume/	The Suspend/Resume/Power	Enable the button from the setup utility.
Power On button does not	On button is disabled from the
work.	Advanced submenu of the
	Power menu of the setup
	utility.
	You did not hold the button	Hold the button longer. This may need to be a few
	in long enough.	seconds if your application is preventing the CPU
		from checking for button pushes.
	There may be a conflict with	Close all applications and try the button again.
	the application software.
The system powers up, and	The boot sequence settings	Set the operating source by pressing the [ESC] key
displays power on informa-	of the setup utility are not	while the Fujitsu logo is on screen or use the [F2]
tion, but fails to load the	compatible with your	key and enter the setup utility and adjust the source
operating system.	configuration.	settings from the Boot menu. (See BIOS Setup
		Utility on page 27 for more information)
	You have a secured system	Make sure you have the right password. Enter the
	requiring a password to load	setup utility and verify the Security settings and
	your operating system.	modify them as accordingly. (See BIOS Setup Utility
		on page 27 for more information)
	Internal hard drive was	Use the BIOS setup utility or Primary Master
	not detected.	submenu, located within the Main menu, to try to
		auto detect the internal hard drive.
An error message is	Power On Self Test (POST) has	See the Power On Self Test (POST) messages to
displayed on the screen	detected a problem.	determine the meaning and severity of the problem.
during the notebook		Not all messages are errors; some are simply status
(boot) sequence.		indicators. (See Power On Self Test Messages on
		page 74 for more information)
Your notebook appears to	BIOS setup changes were not	Make sure you select Save Changes And Exit when
change setup parameters	saved when you made them	exiting the BIOS setup utility.
when you start it.	and exited the BIOS setup
	utility returning it to
	previous settings.
	The BIOS CMOS hold-up	Contact your support representative for repairs.
	battery has failed.	This is not a user serviceable part but has a normal
		life of 3 to 5 years.
Video Problems
The built-in display is	Something is pushing on the	Clear the Closed Cover switch. (See figure 2-5 on
blank when you turn on	Closed Cover switch.	page 6 for location)
your LifeBook notebook.
	The notebook is set for an	Pressing [F10] while holding down the [Fn] key
	external monitor only.	allows you to change your selection of where to
		send your display video. Each time you press the
		combination of keys you will step to the next
		choice. The choices, in order are: built-in display
		only, external monitor only, both built-in display
		and external monitor.

71