First-time setup of your device

Switching on the device for the first time

On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch for wireless components to the ON position before switching on the device.

When you switch on the device for the first time, the supplied software is installed and configured. Because this procedure must not be interrupted, you should set aside enough time for it to be fully completed and connect the device to the mains using the mains adapter.

During the installation process, DO NOT restart the device unless you are requested to do so!

To make it easier to use your device for the first time, the operating system is pre-installed on the hard disk.

2 1

Slide the ON/OFF switch (1) to the right to switch on the Tablet PC.

The ON/OFF switch returns automatically to its original position.

The power-on indicator (2) lights up whenever the system is switched on.

During installation, follow the instructions on screen.

If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet at "http://ts.fujitsu.com/support".

Fujitsu Technology Solutions

19

Page 23
Image 23
Fujitsu Q550 manual Switching on the device for the first time