First-time setup of your device

Selecting a location

Select a suitable location for the device before setting it up. Follow the instructions below when doing so:

Never place the device or the mains adapter on a heat-sensitive surface. The surface could be damaged as a result.

Never place the device on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage.

The underside of the device heats up during normal operation. Prolonged contact with the skin may become unpleasant or even result in burns.

Place the device on a stable, flat, non-slippery surface. Please note that the rubber feet of the device may mark certain types of delicate surfaces.

Keep other objects at least 100 mm away from the device and its mains adapter to ensure adequate ventilation.

Never cover the ventilation slots of the device.

Do not expose the device to extreme environmental conditions. Protect the device from dust, humidity, and heat.

Mains adapter connecting

Observe the safety notes in the enclosed "Safety/Regulations" manual.

The supplied power cable conforms to the requirements of the country in which you purchased your device. Make sure that the power cable is approved for use in the country in which you intend to use it.

3

2

1

Connect the power cable (1) to the mains adapter.

Plug the mains cable (2) into a mains outlet.

Connect the mains adapter cable (3) to the DC jack (DC IN) of the device.

18

Fujitsu Technology Solutions

Page 22
Image 22
Fujitsu Q550 manual Selecting a location, Mains adapter connecting