Servicing Motherboard Components 91
6. Run the show faulty command.
If the show faultycommand reports a fault with a UUID go on to Step 7.If
show faultydoes not report a fault with a UUID, you are done with the
verification process.
7. Switch to the system console and type the fmadm repair command with the
UUID.
Use the same UUID that was displayed from the output of the ILOM show
faulty command.
Related Information
■“Remove FB-DIMMs” on page 85
■“Install Replacement FB-DIMMs” on page 87
■“Upgrade Memory Configuration WithAdditional FB-DIMMs” on page 91
■“FB-DIMM Configuration Guidelines” on page 95
▼Upgrade Memory Configuration WithAdditional FB-DIMMs
Beforeyou begin this memory upgrade procedure, become familiar with the memory
configuration guidelines described in “FB-DIMM Configuration Guidelines” on
page95.
Caution – Ensure that all power is removed from the server beforeinstalling
FB-DIMMs or damage to the FB-DIMMs might occur.
-> show faulty
Target | Property | Value
--------------------+------------------------+-------------------------------
/SP/faultmgmt/0 | fru | /SYS/MB/CMP0/BR0/CH1/D0
/SP/faultmgmt/0 | timestamp | Dec 14 22:43:59
/SP/faultmgmt/0/ | sunw-msg-id | SUN4V-8000-DX
faults/0 | |
/SP/faultmgmt/0/ | uuid | 3aa7c854-9667-e176-efe5-e487e520
faults/0 | | 7a8a
/SP/faultmgmt/0/ | timestamp | Dec 14 22:43:59
faults/0 | |
#fmadm repair 3aa7c854-9667-e176-efe5-e487e520