Servicing Boards and Components 141
FIGURE: Removing the DVD/USB Module (illustrates removal froma SPARC Enterprise
T5120 server)
6. Slide the DVD/USB module out of the hard drive cage.
7. Place the module on an antistatic mat.
Related Information
■“Install the DVD/USB Module” on page141
■“Servicing the Hard Drive Backplane” on page 152
▼Install the DVD/USB Module
Caution – Be certain the DVD type and Hard Drive backplane are compatible: both
are SATAor both are PATAtypes. Special keying will resist installation of a PATA
DVD into a SATA-typeDVD bay. Do not force the module if you meet resistance or
you may damage the backplane, DVD/USB Module, or both.
1. Slide the DVD/USB module into the front of the chassis until it seats.