Identifying Server Components 7
The following table provides descriptions of these controls and indicators.
TABLE: FrontPanel Controls and Indicators (SPARC Enterprise T5120 and T5220 Servers)
LEDor Button Iconor Label Description
Locator LED
and button
(white)
The Locator LED can be turned on to identify a particular system. When on, it
blinks rabidly.There are three methods for turning a Locator LED on:
• Issuing the ILOM command set /SYS/LOCATE value=Fast_Blink
• Issuing the ALOM CMT command setlocator on.
• Pressing the Locator button.
Service
RequiredLED
(amber)
If on, indicates that service is required.POST and ILOM are two diagnostics
tools that can detect a fault or failure resultingin this indication.
TheILOM show faultycommand provides details about any faults that cause
this indicator to light.
Under some fault conditions, individual component fault LEDs arelit in
addition to the system Service Required LED.
Power OK
LED
(green)
Providesthe following indications:
• Off – System is not running in its normal state. System power might be off.
The service processormight be running.
• Steady on – System is powered on and is running in its normal operating
state. No service actions are required.
• Fast blink – System is running in standby mode and can be quickly returned
to full function.
• Slow blink –A normal, but transitory activity is taking place. Slow blinking
might indicate that system diagnostics arerunning, or the system is booting.
Power button The recessedPower button toggles the system on or off.
• Press once to turn the system on.
• Press once to shut the system down in a normal manner.
• Press and hold for 4 seconds to perform an emergency shutdown.
Power Supply
Fault LED
(amber)
REAR
PS
Providesthe following operational PSU indications:
• Off – Indicates a steady state, no service action is required.
• Steady on – Indicates that a power supply failure event has been
acknowledged and a service action is requiredon at least one PSU.
Overtemp LED
(amber)
Providesthe following operational temperatureindications:
• Off – Indicates a steady state, no service action is required.
• Steady on – Indicates that a temperature failure event has been acknowledged
and a service action is required.
Fan Fault LED
(amber)
TOP
FAN
Providesthe following operational fan indications:
• Off – Indicates a steady state, no service action is required.
• Steady on – Indicates that a fan failure event has been acknowledged and a
service action is requiredon at least one of the fan modules.