Servicing Boards and Components 149
■“Remove the Hard Drive Backplane” on page152
▼Install the Hard Drive Cage
Before performing any installation steps, review the proper cable routingand
connections. The following topics contain detailed cable routing information.
■“Internal Cables for Onboard SAS Controller Cards in SPARCEnterprise T5120
Servers” on page 188
■“Internal Cables for Onboard SAS Controller Cards in SPARCEnterprise T5220
Servers” on page 202
1. Position the hard drive cage in the chassis, over the chassis standoffs.
This is shown in the following figure.