26 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
Service-Related ILOM Command Summary

The following table describes the ILOM shell commands most frequently used when

performing service related tasks. The middle column identifies the ALOM CMT

command that produces the same result.

TABLE: Service-RelatedCommands
ILOMCommand ALOMCMT Command Description
help [command] help [command] Displays a list of all available
commands with syntax and
descriptions.Specifying a command
nameas an option displays help for
that command.
set /HOST
send_break_action=break
break [-y][-c][-D]
•-y skips the confirmation
question.
•-cexecutes a console command
after the break command
completes.
•-D forcesa core dump of the
Solaris OS.
Takesthe host server from the OS to
either kmdb or OpenBoot PROM
(equivalentto a Stop-A), depending
on the mode Solaris software was
booted.
set /SYS/component
clear_fault_action=true
clearfault UUID Manually clears host-detected
faults.The UUID is the unique fault
ID of the fault to be cleared.
start /SP/console console [-f]
•-fforces the console to have read
and write capabilities.
Connects you to the host system.
show /SP/console/history consolehistory [-b lines|-e lines|-v]
[-g lines] [boot|run]
Thefollowing options enable you to
specify how the output is
displayed:
•-g lines specifiesthe number of
lines to display beforepausing.
•-e lines displays nlines fromthe
end of the buffer.
•-b lines displays nlines fromthe
beginning of the buffer.
•-v displays the entirebuffer.
•boot|run specifiesthe log to
display (run is the default log).
Displays the contents of the
system’s console buffer.