
154 SPARC Enterprise T5120 and T5220 Servers Service Manual • July 2009
FIGURE: Removing a Hard Drive Backplane (Illustrating removal froma SPARC
Enterprise T5220 server)
3. Slide the backplane down and off the hard drive cage retention hooks.
4. Place the hard drive backplane on an antistatic mat.
Related Information
■“Install the Hard Drive Backplane” on page154
▼Install the Hard Drive Backplane1. Slide the backplane under the retention hooks on the hard drive cage.
2. Install the No. 1 Phillips screws that secure the backplane to the hard drive
cage.
■Twoscrews secure the backplane in the SPARC Enterprise T5120 server. See the
first figurebelow.
■Fourscrews secure the backplane in the SPARC Enterprise T5220 server. See the
second figure below.