Furuno manual NavNet system Model 1724C/1734C

SYSTEM CONFIGURATIONS

All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end.

The number of display units which may be installed depends on the number of network sounder connected. For a system incorporating three or more products, a “hub” is required to process data.

For one network sounder: one radar and three plotters, or four plotters

For two network sounder: one radar and two plotters, or four plotters

NavNet system (Model 1724C/1734C)

Antenna Unit	GPS receiver
(ex. MODEL 1724C)	GP-310B/320B

Display Unit

RDP-148

Remote

Controller

RMC-100

E/S

Navigator

External buzzer

PC

Echo sounder

Other NavNet unit

(GD-1720 etc.)

Network sounder

ETR-6/10N

Heading sensor

Rectifier

PR-62

12-24 VDC 100/110/115/220/230 VAC

1φ, 50/60 Hz

NavNet system (Model 1724C/1734C)

ix