Furuno 1734C manual Working with Track, Displaying track, Own ship track, Track control menu

Models: 1734C

1 241
Download 241 pages 9.89 Kb
Page 89
Image 89

3. PLOTTER OPERATION

3.6Working with Track

Your ship’s track is plotted on the screen using navigation data fed from position-fixing equipment. This section shows you what you can do with track, from turning it on or off to changing its plotting interval. In the default setting, own ship’s track is turned on and is displayed in red.

3.6.1Displaying track

Own ship track

1.Press the MENU key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.

OWN SHIP TRACK DISP ON

OWN SHIP TRACK COLOR

RED

TARGET TRACK DISPLAY

OFF

TARGET TRACK COLOR WHITE

INTERVAL

TIME TIME INTERVAL

00m10s

DISTANCE INTERVAL 00.10nm

MEMORY(TRACK & MARK) 2000POINTS

(MARK MEMORY) (6000)POINTS

SHIP’S TRACK STATUS

TRACKING

TRACK: 1234/2000

MARK : 9/6000

TRACK CONTROL

EDIT

TRACK

RESUME

ERASE

T & M

MARK

SETUP

RETURN

Track control menu

2.Use the Cursor pad to select OWN SHIP TRACK DISP.

3.Press the EDIT soft key to show the track display window.

4.Use the Cursor pad to select ON (default setting) or OFF as appropriate.

5.Press the ENTER soft key.

6.Press the MENU key to close the menu.

Note: The number of track and mark points used appears at the SHIP’S TRACK STATUS window on the TRACK CONTROL menu. Using the figure above as an example, 1234 points of track and 9 marks have been recorded.

Target track

Target track, NMEA format TTM (Tracked Target Message) data sentence, may be turned on or off as desired. The default setting is ON.

1.Press the MENU key followed by the CHART SETUP and TRACKS & MARKS CONTROL soft keys to open the TRACK CONTROL menu.

2.Use the Cursor pad to select TARGET TRACK DISPLAY.

3.Press the EDIT soft key to show the target track display window.

3-18

Page 89
Image 89
Furuno 1734C manual Working with Track, Displaying track, Own ship track, Track control menu, Target track