Furuno 1734C manual Following a route, Selecting the route to follow, 16.0 nm

3. PLOTTER OPERATION

3.10.4 Following a route

Selecting the route to follow

1.Press the MENU key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the ROUTES soft key to open the route list.

4.Select a route.

5.Press the GOTO soft key to show the plotter display. The cursor is on the waypoint nearest own ship.

WPT FISH	FROM	1.3 nm	GOTO
	OS	208.5° M	ROUTE

16.0 nm

WP-002

FISH

WP-001

CRAB

GOTO

WPT

RVRSE

ROUTE

RETURN

Plotter display, route selected as destination

6.Operate the Cursor pad to place the cursor on the waypoint or leg in the route from where to start navigating the route.

7.Press the GOTO WPT or FOLLOW LEG soft key, depending on the action taken at step

A solid blue line runs between own ship and first waypoint. Green dashed lines connect all other waypoints. The arrows on the lines show the direction to traverse the route.

Navigating waypoints in reverse order

Press the RVRSE ROUTE soft key followed by the ENTER knob to navigate waypoints in reverse order. The arrows on the route line point in the direction selected.

3-45