Furuno 1734C manual Navigator Setup, Navigation data source, Combination screen selection window

7. CUSTOMIZING YOUR UNIT

3.Rotate the ENTER knob to select the full-screen picture desired and push the ENTER knob. A set of combination screens, corresponding to the full-screen selected, appears.

HOT PAGE 1

	-
	-
	-
10	-
	-
	-
	-
20 -

Combination screen selection window

4.Rotate the ENTER knob to select the full screen or combination screen desired and push it to set.

7.7Navigator Setup

This section provides the information necessary for selecting the type of navigator connected to your plotter.

7.7.1Navigation data source

The NAV SETUP menu mainly selects the source of nav data. For GPS receiver other than the GP-320B, speed averaging and local time offset (to use local time) are also available. Press the MENU key followed by the SYSTEM CONFIGURATION, NAV OPTION and NAV SOURCE SETTINGS soft keys to display this menu.

POSITION SOURCE		NAV
		SETUP
	ALL
SPEED SOURCE
	ETR	EDIT
TEMPERATURE SOURCE
	ETR
DEPTH SOURCE
	ETR
STW CALIBRATION
	+00%
TEMP CALIBRATION
	+00.0 F
DEPTH CALIBRATION
	+00ft
WIND AVERAGING
	001 seconds (s)
WIND DIRECTION OFFSET		RETURN
	S000.0
WIND SPEED CALIBRATION
	+00%
STW	TEMP
30.0kt	+41.3 F
DEPTH
50.0ft	WIND DIR
WIND SPEED
--.-kt	---.-

7-24