Furuno 1734C manual Pulselength, Signal process soft keys

2. RADAR OPERATION

2.8Pulselength

The pulselength in use is displayed at the upper left corner of the display. Appropriate pulselengths are preset to individual range scales. Therefore, you are not usually required to select them. If you are not satisfied with the current pulselength setting, however, it is possible to change it for the ranges shown below. Generally, select a longer pulse for longer detection range and shorter pulse for better range discrimination.

1.5nm, 1.5 sm, 3 km: Short pulse, medium pulse 3 nm, 3 sm, 6 km: Medium pulse, long pulse

1.If not displayed, press the HIDE/SHOW key to show the radar soft keys.

2.Press the SIGNAL PROC. soft key.

1.5/

H-UP

.500nm	319.9	° M	SIGNAL
SP			PROCESS

I. REJ

LOW

PULSE

SHORT

E. STR

LOW

RETURN

+359.9° R 1.40nm

Signal process soft keys

3.Choose the 1.5 nm or 3 nm with the RANGE key.

4.Press the PULSE soft key to select the pulselength setting. SHORT or MEDIUM for 1.5 nm, 1.5 sm, 3 km and MEDIUM or LONG for 3 nm, 3 sm,

6 km.

5.Press the RETURN soft key to finish.

2-6