Furuno 1734C manual Plotter function key menu, Function Default Function Function Key Label

7. CUSTOMIZING YOUR UNIT

7.3.2Function key setup

The function keys provide one-touch execution of a desired function. The default plotter function key settings are as shown in the table below.

Function	Default Function	Function Key Label
Key
1	Start/stop recording/plotting own ship’s track.	TRK
2	Edit mark/line.	EML
3	Ruler (measure range and bearing between two points).	RUL
4	Add new waypoint.	ADD
5	Alphanumeric waypoint list.	ALP

If the above settings are not to your liking you may change them as follows:

1.Press the MENU key.

2.Press the FUNCTION KEY SETUP soft key.

Function key setting

Function key label

	FUNC
▲	KEY
SOFT KEY 1
TRK: TRACK ON/OFF	EDIT
	T
SOFT KEY 2	R
	K
EML: EDIT MK/LINE
	E
SOFT KEY 3	M
	L
RUL: RULER	R
	U
SOFT KEY 4	L
ADD: ADD NEW WPT
	A
SOFT KEY 5	D
	D
ALP: ALPHA LIST	RETURN
	A
	L
	P

Plotter function key menu

3.Select the soft key you want to program, then press the EDIT soft key. A menu shows the functions available and the current selection is highlighted.

7-11