Furuno 1734C manual Using the Offset EBL, Predicting collision course, Automatic shift

2. RADAR OPERATION

Setting automatic shift maximum speed

1.If not displayed, press the HIDE/SHOW key to show the radar soft keys.

2.Press the RADAR DISPLY soft key.

3.Press the SHIFT soft key to show the shift soft keys.

4.	Press the AUTO S.SPD soft key to display the auto ship
		AUTO SHIP SPEED
	speed setting window.
5.	Adjust the Cursor pad or ENTER knob to set the	15
	maximum speed of your vessel, and then push the
	ENTER knob or the ENTER soft key to set. The setting
	range is 1-999 kt and the default setting is 15 kt.

Automatic shift

Press the AUTO soft key. To cancel, press the RADAR DISPLY, SHIFT and OFF soft keys.

2.17 Using the Offset EBL

The offset EBL can be used to predict a potential collision course. It can also be used to measure the range and bearing between two targets.

2.17.1 Predicting collision course

The procedure below may be used to check if a radar target is on a potential collision course with your vessel.

1.Press the EBL/VRM key to show the EBL/VRM soft keys.

2.Press the EBL1 ON soft key to turn on the EBL1.

3.Press the OFFSET soft key. The origin of EBL1 moves to the cursor position, which is marked with an “X.”

4.Use the Cursor pad to place the cursor on the radar target which looks like it might be on a collision course with own ship.

5.Push the ENTER knob to fix the origin position.

6.After waiting for a few minutes (at least three minutes), rotate the ENTER knob so the EBL bisects the target at the new position. If the target tracks along the EBL towards the center of the display (your ship’s position), the target may be on a collision course with your vessel.

To cancel the offset EBL, press the OFFSET soft key.

2-16