Furuno 1734C manual Reducing Precipitation Clutter, Adjusting the A/C SEA, SEA setting window

2. RADAR OPERATION

2.5.2Adjusting the A/C SEA

A/C SEA should be adjusted so that the clutter is broken up into small dots, and small targets become distinguishable.

1.Press the GAIN key.

2.Press the A/C SEA soft key to show the A/C SEA setting window.

A/C SEA

AUTO ROUGH

°AUTO MODERATE §AUTO CALM

MAN 0

A/C SEA setting window

3.Use the Cursor pad to select AUTO ROUGH, AUTO MODERATE, AUTO CALM, or MAN (manual) as appropriate. Select an AUTO option according to the sea state.

4.For manual adjustment, rotate the ENTER knob to adjust. The range of adjustment is 0-100. Do not overadjust – weak echoes may be missed.

5.Press the GAIN key on the front panel or RETURN soft key to finish.

2.6Reducing Precipitation Clutter

The vertical beamwidth of the antenna is designed to see surface targets even when the ship is rolling. However, by this design the unit will also detect precipitation clutter (rain, snow, hail, etc.) in the same manner as normal targets. Precipitation clutter shows as random dots on the screen.

When echoes from precipitation mask solid targets, adjust the A/C RAIN to split up these unwanted echoes into a speckled pattern, making recognition of solid targets easier.

1.Press the GAIN key.

2.Press the A/C RAIN soft key to show the A/C RAIN window.

A/C RAIN

0

A/C RAIN setting window

3.Rotate the ENTER knob to adjust the A/C RAIN. The current level is shown on the A/C RAIN level bar in the A/C RAIN window, and the range of adjustment is 0 to 100(%). Do not overadjust – weak echoes may be missed.

4.Press the GAIN key on the front panel or RETURN soft key to finish.

2-4