Furuno 1734C manual Appendix

4.3.4 Shifting the range		4-8
4.4	Measuring Depth, Time	4-9
4.5	Reducing Interference	4-9
4.6	Reducing Low Level Noise	4-10
4.7	Erasing Weak Echoes	4-11
4.8 White Marker		4-12
4.9	Picture Advance Speed	4-12
4.9.1 Advancement independent of ship’s
speed		4-12

4.9.2 Advancement synchronized with ship’s

speed		4-13
4.10	Display Colors	4-14
4.11 Alarms		4-15
4.11.1 Audio alarm on/off		4-15
4.11.2 Bottom alarm		4-16
4.11.3 Fish alarm		4-16
4.11.4 Fish alarm (B/L)		4-17
4.11.5 Water temperature alarm		4-17
4.11.6 When an alarm setting is violated
	...................................	4-18
4.12 Water Temperature Graph		4-19
4.13	Changing Pulse Repetition Rate	4-19
4.14	Saving Sounder Picture to an SD Card
	.................................................	4-20
4.15	Interpreting the Sounder Display	4-20
4.15.1 Zero line		4-20
4.15.2 Bottom echo		4-21
4.15.3 Fish school echoes		4-22
4.15.4 urface noise/Aeration		4-22

5. ................................................ 5-1

6. DATA TRANSFER	6-1
6.1 Memory Card Operations	6-1
6.1.1 Deleting all data from memory cards
(other than chart data)	6-1
6.1.2 Saving data to a memory card	6-2

6.1.3Playing back data from a memory card

..................................... 6-3

6.2 Uploading, Downloading Data 6-4

6.2.1 Setting communication software on the

PC	.....................................	6-4
6.2.2 Uploading or downloading data		6-4
6.3	Loading Waypoint Data from Yeoman	6-7
6.4	Receiving Data Via Network Equipment .6-8
6.5	Outputting Data Through the Network ....	6-9

7.	CUSTOMIZING YOUR UNIT ..	7-1
7.1	General Setup	7-1

7.2	Radar Setup	7-4
7.2.1 Radar display setup		7-4
7.2.2 Radar range setup		7-7
7.2.3 Function key setup		7-8
7.3	Plotter Setup	7-10
7.3.1 Navigation options		7-10
7.3.2 Function key setup		7-11
7.4	Chart Setup	7-14
7.4.1 Chart offset		7-14
7.4.2 Navionics GOLD chart attributes....		7-15
7.4.3 C-MAP chart attributes		7-16
7.5	Data Boxes Setup	7-22
7.6	Hot Page Setup	7-23
7.7	Navigator Setup	7-24
7.7.1 Navigation data source		7-24

7.7.2 GPS receiver setup (Set equipped with

GP-310B/320B)	7-26
7.7.3 TD display setup	7-29
7.8 Nav Data Display Setup	7-32
7.9 Sounder Setup	7-33
7.9.1 System setup	7-33
7.9.2 Sensor setup	7-36
7.9.3 Sounding range, zoom range, bottom
lock range	7-37
7.9.4 Function key setup	7-38
7.10 Nav Graphic Display Setup	7-40

8.	MAINTENANCE,
TROUBLESHOOTING		8-1
8.1	Preventive Maintenance	8-1
8.2	Replacement of Batteries	8-2
8.3	Replacement of Fuse	8-2
8.4	Replacing the Magnetron	8-3
8.5	Simple Troubleshooting	8-3
8.5.1 General		8-3
8.5.2 Radar		8-4
8.5.3 Plotter		8-4
8.5.4 Sounder		8-5
8.6	Diagnostics	8-6
8.6.1 Memory I/O test		8-6
8.6.2 Test pattern		8-8
8.6.3 Keyboard, remote controller test ....		8-10
8.7	GPS Status Display	8-11
8.8	Clearing Memories	8-12
8.9	Error Messages	8-13

APPENDIX	AP-1
Menu Overview	AP-1
ALARM key	AP-9

iv