Furuno 1734C Shifting the Picture, Manual shift, Automatic shift, Target no. selection window

Shift speed setting

Cursor

2. RADAR OPERATION

SELECT TARGET NO.

▲

1

▼

Target no. selection window

5.Use the ENTER knob to select number (1-10), then push the ENTER knob. If the target number does not exist several beeps sound and the zoom function is cancelled.

To cancel, press the CURSOR LOCK soft key.

Note: The zoom window blends in with the background when the background color for the radar picture is white. If the window is difficult to see, change the background color.

2.16 Shifting the Picture

Own ship position, or sweep origin, can be displaced manually or automatically to expand the view field without switching to a larger scale. Zoom is not available when the display is shifted.

2.16.1 Manual shift

The sweep origin can be shifted in any presentation mode to a point specified by the cursor by up to 50% of the range in use in any direction.

SHIFT

1.	Locate the cursor anywhere within	Place cursor	Press the MANUAL soft key.
	the effective radius of the display.
2.	If not displayed, press the	where desired.
			Manual shift
	HIDE/SHOW key to show the
	radar soft keys.

3.Press the RADAR DISPLY soft key.

4.Press the SHIFT soft key.

5.Press the MANUAL soft key to shift. The heading line shifts to the cursor location. SHIFT appears at right-hand corner of the display.

To cancel shift, press the RADAR DISPLY, SHIFT and OFF soft keys.

2.16.2 Automatic shift

The amount of automatic shift is calculated

Ship's speed

according to ship’s speed, and the amount ofX 0.5 = Amount of shift(%) shift is limited to 50% of the range in use. For

example, if you set the shift speed setting for 15 knots and the ship is running at 10 knots the amount of shift will be about 34%. The formula for determining shift amount is as shown above. Automatic shift mode is only available in the head-up mode.

2-15