Furuno 1734C manual Plotter Displays, Full-screen plotter display, Nav data window

Presentation mode (North-up)

Trip distance

3. PLOTTER OPERATION

3.1Plotter Displays

You may show the plotter display over the entire screen, in the overlay screen with the radar display, or in a combination screen.

3.1.1Full-screen plotter display

Nav data window

(Data changes with NAV soft key setting and cursor

status. For details see next page.)

34°	22. 3456'N	359.9° M	TRIP NU
080°	22. 3456'E	19.9 kt	99.9 nm

Scale	16.0nm			MARK
		S I		ENTRY
			M
				MODE
Icon (from left)				NTH UP
North Marker				NAV
Chart				POS
Alarm
Track Hold
Chart Offset	002WP	FISH		D. BOX
Save				ON/ OFF
L/L Offset				BRIDGE
Battery
Simulation
(See icon
table on
appendix
for details.)				Own ship
Waypoint name
				marker

Functions for soft keys

Course bar

Waypoint markerOwn ship track

Full-screen plotter display

Note: When GPS signal error is found, the following occurs depending on the device feeding position data:

GPS Receiver GP-310B/320B:Alarm icon () appears and the aural alarm sounds. Own ship marker blinks faster.

Other navigator: The message “NO GPS FIX” appears and is accompanied by the aural alarm and alarm icon. If the GPS signal is missing for more than 90 seconds, the message “NO POSITION DATA” appears.

Nav data window

The data shown in the nav data window depends on the status of the NAV soft key and the cursor.

3-1