Furuno FR-8122, FR-8252, FR-8062 manual Displaying AIS Target Data, AIS data

4. AIS OPERATION

4.5Displaying AIS Target Data

The data box at the bottom of the screen can show the data (MMSI No., ship name, bearing, course, range, CPA and TCPA) for up to two AIS targets. (Set Data Box in the Display menu to Target or All to show AIS target data.)

To show AIS target data, place the cursor on the activated target that you want to know its data and press the ENTER key.

3	0.5
	NM

+

(A)

000000026

AIS target selected for data display

(A or B: Data box location

9-digit no.: MMSI)

+ Cursor

A

	+ 110.1°R	2.525 NM
Data box A		B	Data box B

Bearing, range, CPA Course, speed, TCPA

	Data box (A or B)			MMSI of vessel
	Vector reference
		Vector time Name of
			vessel
A	TRUE 5 min			MMSI: 000000026
	NAME: PEGASUS
BRG 236.5°T		LENGTH: 100M BEAM: 45M			Length, Beam
		RNG	1.850NM	CPA 1.84NM	of vessel
CSE 33.7°		SPD	12.34kt	TCPA 12:00

AIS data

The AIS target chosen is marked with MMSI no. and the alphabet A or B, which corresponds to the data box in which the target’s data appears. The box is automatically chosen on a first-in, last- out basis. For example, if both data box A and data box B are currently showing data and target A was selected before target B, the data in data box A will be erased and replaced with the data of the newly selected AIS target.

To remove a target’s data from a data box, place the cursor on its target symbol and press the CANCEL/HL OFF key.

4-3