Furuno FR-8122, FR-8252, FR-8062 manual ARP Target Data, ARP target data

3. ARP OPERATION

3.8ARP Target Data

You can show target data (range, bearing, course, speed, CPA and TCPA) for two tracked ARP targets, in the data box at the bottom of the screen. To display ARP target data, the ARP display must be activated and the menu item Data Box in the Display menu must be set for Target or All.

1.Place the cursor on the ARP target for which you want to know its data.

2.Press the ENTER key to show the target’s data.

3	NM
	0.5

(A)01

+

02

	+ 110.1°R	2.525 NM
A		B
Data box A			Data box B

ARP target selected for data display A(or B) denotes data box location.

ARP target

Bearing, range, CPA Course, speed, TCPA

Data box (A or B) Vector reference

Vector time

Target no.

ATRUE 5 min No.01

BRG 236.5°T	RNG	1.850NM	CPA	1.84NM
CSE 33.7°	SPD	12.34kt	TCPA	12:00

ARP target data

The target is enlarged and its target number is prefixed with (A) or (B) to show which data box its data appears in. The box is automatically chosen on a first-in, first-out basis. For example, if both data box A and data box B are currently showing data and target A was selected before target B, the data in data box A will be erased and replaced with the data of the newly selected target.

To remove a target’s data from a data box, place the cursor on its target symbol and press the CANCEL/HL OFF key.

3-7