Furuno FR-8122, FR-8252, FR-8062 manual Remote Display, Unavailable menu items, Display appearance

1. OPERATIONAL OVERVIEW

1.45Remote Display

This radar may be used as a remote display by setting Input Source to Sub on the Installation menu. When this is done, the menu and display change as described below. To display the radar image on the remote display, transmit from the main radar.

Unavailable menu items

Menu items not available with the remote display

Menu	Unavailable menu item(s)
DIsplay	Watchman
Echo	Pulse Length, Antenna Speed, 2nd Echo Rejector
Custom 1, 2, 3	Pulse Length, Antenna Speed
Tuning	All menu items inoperative
System - Installation	Tuning Initial Adjust, Auto Installation Setup, Total TX Time,
	Manual MBS Adjust, Antenna Rotation
System - Sector Blank 1, 2	All menu items inoperative

Display appearance

The display changes as shown in the illustration below.

	Pulse length			Shown when display
	is not displayed.					Neither tuning indicator
				unit functions as		nor tuning bar is displayed.
				remote display.
0.75			0.25	359.9° M	SUB
			NM
						GAIN AUTO
		H UP	OFFCENTER(M)			SEA AUTO
		HARBOR A/C AUTO				RAIN AUTO
		ES 1	EAV1					2ND ECHO
		NR LOW
							ZOOM	is not displayed.
		IR LOW

WATCH (incl. time remaining) is not displayed.

Display indications for remote display

Stand-by display modes

•The Total TX Time indication (TX TIME XXXXXX.XH) does not appear on the Normal stand-by display.

•The “SUB” indication also appears on the Nav data stand-by display.

•The Nav data stand-by display shows the “SUB” indication but not the “WATCH” indication (including time remaining).

1-60