Furuno FR-8252, FR-8062, FR-8122 manual Watchman, How watchman works

1. OPERATIONAL OVERVIEW

1.33Watchman

The Watchman feature transmits for one minute at the elapse of the chosen time interval to help you keep regular watch of the radar picture for safety or other purposes.

Tx ST-BY *

Tx

ST-BY *

	1 min	5,10 or 20 min.	1 min.	5,10 or 20 min.
		* Beep emitted just before radar transmits.
Watchman
starts

How watchman works

In standby condition, the timer below the WATCH label at the upper right corner of the screen counts down the time remaining until transmission. When the preset time interval has elapsed, the audio alarm sounds, the timer disappears and the radar transmits for one minute. After one minute, the watch alarm timer begins the countdown sequence again.

If you press the STBY/TX key before the preset time interval has elapsed, the radar goes into standby.

Do the following to activate Watchman:

1.Press the MENU key to show the menu.

2.Choose DIsplay and press the ENTER key.

3.Choose Watchman and press the ENTER key.

Off

5min

10min

20min

4.Choose Off or appropriate time (5, 10 or 20 min) and press the ENTER key.

5.Press the MENU key to close the menu.

1-43