1. OPERATIONAL OVERVIEW
Menu description
Brill/Color: Choose colors; adjust range ring brilliance.
DIsplay: Control display functions.
Echo: Adjust radar echo.
Target Trails: Process target trails.
Mark: Process markers such as VRM and EBL.
Custom
Tuning: Adjust radar tuning.
GPS Buoy: Set up GPS buoy display.
Target: Set up ARP and AIS targets.
ARP: Set up ARP display.
AIS: Set up AIS display.
GPS: Set up FURUNO GPS receiver interfaced with this radar.
System:
Initial: Initial settings.
Factory: System diagnostic and LCD test.
Installation: Items for installation. Not accessible by user.
Sector Blank 1, Sector Blank 2: Set up for preventing transmission in a certain area.
3.Press the ENTER key to switch control to the menu items column. At this time the cursor in the menu column turns gray and the cursor in the menu items column is yellow, indicating that con- trol is now with the menu items column.
To switch control between the menu column and menu items column, use the CANCEL/HL OFF key. The color of the title bar of the active column is blue and the color of the title bar of the inactive column is gray.
4.Roll the trackball to choose the menu item desired and press the ENTER key. A window with options for the corresponding menu item appears. For example, the window below shows the options for Color in the Target Trails menu.
Green
Red
Blue
White
Black
5.Roll the trackball upward or downward to choose appropriate option.
6.Press the ENTER key to save your selection. To close the window without saving, press the CANCEL/HL OFF key (instead of the ENTER key).
7.Press the MENU key to close the menu.
Note
The menus on the
Menus do not close automatically in the “River” or “Sea” configuration.
