Furuno FR-8062 manual Restarting trails, Trail length, Restart feature Trail copy feature Action

1. OPERATIONAL OVERVIEW

1.25.9Restarting trails

When the range is changed while the trail feature is active, trails within the former range scale may stopped and restarted. The relationship between trail restart and trail copy is shown in the table below.

Restart feature	Trail copy feature	Action
Off	On or Off	Range switched to adjacent range scale
		All trails are erased when range is changed. Trails are
		not restarted.
		Return to previous range scale
		Previous trails are displayed and are continued.
On	On	Range switched to adjacent range scale
		Previous trails remain on the display and are con-
		tinued.
		Return to previous range scale
		Previous trails are displayed and are continued.
	Off	Range switched to adjacent range scale
		Trails are restarted.
		Return to previous range scale
		Trails are restarted.

1.Press the MENU key to open the menu.

2.Choose Restart and press the ENTER key.

3.Choose Off or On as appropriate and press the ENTER key.

4.Press the MENU key to close the menu.

1.25.10 Trail length

Several preset trail lengths (times) are programmed for the TRAILS key for your convenience.

Standard trail times: 15 s, 30 s, 1 min, 3 min, 6 min, 15 min, 30 min, continuous

12H and 24 times: Long trail settings, continuous

If you prefer a different time you may set it as below.

1.Press the MENU key to open the menu.

2.Choose Target Trails and press the ENTER key.

3.Choose Length and press the ENTER key.

Normal 12H 24H

4.Choose Normal, 12H or 24H as appropriate and press the ENTER key. Normal: Use times programmed for the TRAILS key.

12H: Continuous trail from 30 minutes to 12 hours, in increments of 30 minutes.

24H: Continuous trail from one hour to 24 hours, in increments of one hour. For Normal, go to step 7. For 12H or 24H, go to the next step.

1-35