Furuno FS-5070 manual FAX Enable/Disable, Speaker Setting in Off Hook, Operation Timer Off

6. MENU OPERATION

6.16FAX Enable/Disable

You may enable or disable FAX use as follows. This setting is necessary when the facsimile is connected and used to receive.

1.Press the #/SETUP key.

2.Rotate the ENTER knob to choose USR SETUP, and then push the ENTER knob.

3.Rotate the ENTER knob to choose FAX Rx and then push the ENTER knob.

4.Rotate the ENTER knob to choose ENABLE or DISABLE as appropriate and then push the ENTER knob.

When choosing ENABLE, “FAX” is added to the emission mode.

CH:	200
Tx:	2182.0 kHz
Rx:	2182.00 kHz

Emission mode		SSB	HIGH FAST NB SQ
		TLX		S
		FAX		10.0A
		AM			UTC 00:00
	135 00.0000E				EPFS 23:59

5. Press the CANCEL key twice return to the radiotelephone screen.

6.17Speaker Setting in Off Hook

When the handset is off hook, you may choose to turn the speaker (panel speaker or external speaker) on or off. The default setting is OFF, which turns off the speaker when the handset is off hook. The ON position keeps the speaker on always, regardless of handset state.

1.Press the #/SETUP key.

2.Rotate the ENTER knob to choose USR SETUP and push the ENTER knob.

3.Rotate the ENTER knob to choose HOOK SP OFF, push the ENTER knob.

4.Rotate the ENTER knob to choose ON or OFF as appropriate, and push the ENTER key.

6.18Operation Timer Off

When the screen which cannot receive the DSC message is active more than 10 minutes without any operation, the control unit returns to the radiotelephone screen automatically. You can enable/disable this function as below:

1.Press the #/SETUP key.

2.Rotate the ENTER knob to choose USR SETUP and push the ENTER knob.

3.Rotate the ENTER knob to choose TIMER, push the ENTER knob.

4.Rotate the ENTER knob to choose 10MIN or OFF as appropriate, and push the ENTER knob.

6-23