Furuno FS-5070 manual Able acknowledge call received, Unable acknowledge call received

5. ROUTINE MESSAGE CALLING, RECEVING

Able acknowledge call received

Communicating by radiotelephone

1. Press the CANCEL key to silence the audio alarm, and the display changes as below.

* Received message *

MAR-23-2006-23:59

ABLE ACKNOWLEDGE

SENDER ID:	123456789
PRIORITY : ROUTINE TX:2138.0kHz
TELEPHONE	RX: 2138.0kHz
	10M10S

GO TO VIEW

2.Press the CANCEL key to go to the radiotelephone screen.

3.The working frequency is automatically set; you may start voice communications by radiotelephone.

Sending message by NBDP Terminal Unit

The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.” Appears on the NBDP’s display.

1.Press any key on the NBDP Terminal Unit to erase the message.

2.Press the function key F3 on the keyboard of the NBDP Terminal Unit to show the Operate menu.

3.Choose “Call Station” and then press the Enter key.

4.“DSC” is selected; press the Enter key. “Connect” appears in reverse video.

5.Type and transmit your message.

6.When you have finished sending your message, press the F10 key to disconnect the line.

Unable acknowledge call received

1.Press the CANCEL key to silence the alarm. The display looks something like the one below.

* Received message *

MAR-23-2006-23:59

UNABLE ACKNOWLEDGE NO REASON GIVEN

SENDER ID: 123456789

PRIORITY: ROUTINE 10M10S

GO TO VIEW

Reason for unable to acknowledge:

NO REASON GIVEN

CONGESTION AT SWITCHING CENTRE* BUSY

QUEUE INDICATION*

STATION BARRED*

NO OPERATOR AVAILABLE*

OPERATOR TEMPORARILY UNAVAILABLE* EQUIPMENT DISABLE

MODE NOT USABLE CHANNEL NOT USABLE

* Coast station use

2.If the coast station sends the message “QUEUE INDICATION,” wait until your turn arrives.

5-6