Routine Message CALLING, Receiving | Furuno FS-5070 instruction

5.ROUTINE MESSAGE CALLING, RECEIVING

Operation overview

The following shows about the individual message as example of the routine message. The individual call is for sending a call to a specific station.

1.Send the individual message.

2.Wait for the individual message acknowledgement.

3.Start the communication.

(1)

(2)

(3)

Own Ship

(1)DSC Message [Called Acknowledge Request (ACK RQ) Signal]

(2)Acknowledge Back (ACK BQ) Signal

(3)Voice or telex communication

Coast

Station

5.1Individual Call

The individual call is for calling a specific station. After sending an individual call, called ACK RQ transmission, wait to receive the acknowledge back (ACK BQ) signal from the receiving station.

5.1.1Sending an individual call

1. Press the DSC key.

Select Message

		GENERAL		DISTRESS
		INDIVIDUAL		RELAY AREA
		PSTN MESSAGE		RELAY COAST
		TEST MESSAGE		DISTRESS
		GROUP MESSAGE		DISTRESS
		GROUP MESSAGE
		AREA MESSAGE		SPECIAL
		POSITION		SPECIAL
		MMSI 123456789		UTC 01:53
		POS 12 34.5678N		UTC 01:53
		123 45.6789E		EPFS 01:54

2. Rotate the ENTER knob to choose INDIVIDUAL and then push the ENTER knob.

5-1

Image 61

Furuno FS-5070 manual Routine Message CALLING, Receiving, Individual Call, Sending an individual call, Operation overview

Contents

Model FS-5070 00016050113 Important Notice How to discard this product How to discard a used batteryGeneral Safety Instructions Iii For IC-302 option operation Distress Alert Message Procedure Distress Cancellation Proc. Select frequency Push Enter Canceling Distress Alert Communicate, via radiotelephone, with the coast station Send cancel msg. by voice on 2182.0 kHz Table of Contents Send calls Viii Menu Operation Nbdp TRANSMITTING, Receiving 11-1 11.111.2 11-2 Foreword FeaturesXii General Xiii Program Number Standard configuration is shown with solid line System ConfigurationsXiv FS-1570 Terminal Unit FS-2570 FS-5070 Xvi Operational Overview PWR/VOL knob Turns the power on/off Adjusts volumeControls Description of controls Radiotelephone RT Screen Turning the Power On/OffRadiotelephone RT screen Indication DSC Standby ScreenDSC standby screen Control Unit Dimmer, Contrast Setting Scan FrequenciesLoudspeaker System Characteristics Setting for Auto AcknowledgementEquipment priority Controls become inoperative Intercom Automatic setting of working frequency Choosing Class of Emission SSB Radiotelephone Choosing channel Choosing Channel, FrequencyChoosing band and band channel with the Enter knob Rotate the Enter knob to set band or channel desired Transmitting Transmitting procedureChoosing frequency Entering frequency with the numeric keys Condition of the transmitting unit Reducing transmitter power Checking the transmitting power RF gain sensitivity adjustmentRotate the Enter to adjust and then push the Enter knob Receiving Squelch function Receiving AM broadcasting stationsNoise blanker Squelch on/off High Tension Hazard When Automatic Tuning Fails User Channels DSC Overview What is DSC?DSC Message Call Description Contents of a DSC call Alarm Frequency interval Audio Alarms Receive calls Interpreting Call DisplaysDistress receive call Individual receive call Send callsReceived message View message Compose msg Individual send call Sending Distress Alert Distress OperationsDistress operation overview Ship in Distress Distress Operations Received message Twice and then go to step Push the Enter knob to open the Input Type menuPush the Enter knob to open the latitude input window Compose msg Push the Enter knob to open the time input window Communicating by Nbdp Terminal Unit Display changes as below example Distress alert received on MF band Receiving a Distress Alert Action for ship receiving distress alert on MF band Distress alert message received Distress acknowledge message in progress Distress alert received on HF band Agree Action for ships receiving distress alert on HF band Sending the distress relay to coast station on HF band Wait for distress relay acknowledge Push the Enter knob to open the DSC FREQ. Menu Sending distress relay to coast station Sending Distress Relay on Behalf of a Ship in Distress Ship ID in Dist Push the Enter knob to open the Ship ID in Dist window Telephone Priority distress Transmit sure? Press the Cancel key to silence the audio alarmDistress relay coast message in progress Distress relay ack message received Area Circle Sending distress relay to area ships Ship ID in Dist Nature Telephone Distress relay area message in progress Receiving Distress Relay from Coast Station Cancelling Distress Call Distress Cancellation Proc. Select frequency Push Enter Individual Call Routine Message CALLING, ReceivingSending an individual call Operation overview NBDP-ARQ Push the Enter knob to open the Priority menu Safety or urgency priority How to Set Working Frequency, ChannelRoutine priority Compose msg How to Set DSC Frequency Able acknowledge message received Press Call key for forced transmission Unable acknowledge call received Able acknowledge call received No response! Try calling again? Receiving an individual callSend Able acknowledge Send Unable acknowledge Manually Sending automatic acknowledge ACK BQ with comply type Able Unable acknowledge message in progress Sending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Manually acknowledging individual call with Unable No Reason Reason Busy Sending a group call Group CallPress the 2/DSC key Select Message MHZ Sending message by Nbdp Terminal Unit Receiving a group call Receiving message by Nbdp Terminal Unit Geographical Area Call Area Sending a geographical area call Receiving a geographical area call Geographical Area Sender ID Sending a neutral craft call Neutral Craft Call Receiving a neutral craft call Sending a medical transport call Medical Transport Call 2187.5 Receiving a medical transport call Receiving a Polling Request Press the Cancel key to return to the radiotelephone screenAutomatic reply Manual reply Requesting other ship’s position Position CallFinding position of other station Sending own ship’s position to other station Station ID Position call other ship requests your position Cancel call Press the Cancel keyAcknowledge message received Automatic reply Manual reply If canceling to send the reply, press the Cancel key Sending a Pstn call, receiving acknowledge back ACK BQ Pstn Call To scroll Push the Enter knob to open the TEL NO. menu Waiting for acknowledgement Then, one of the following displays appears Receiving a Pstn call, sending acknowledge back ACK BQUnable acknowledge message received Shortly thereafter, one of the following messages appears No response! charge information Manual To return to the log selected, press the Cancel key To view the contents of a file, do the followingDeleting log files This page is intentionally left blank Setup Adjusting Handset VolumeMenu Operation Squelch Frequency Noise BlankerRegistering user channels User ch entry User ch Push the Enter knob to open the user channel options window Deleting user channels Preparing TX MessagePreparing individual calls Deleting individual user channels Frequency Push the Enter knob to open the Station ID entry window Push the Enter knob to open the file name entry window How to Enter File Name and Number Push the Enter knob to continue Preparing group calls Message 2 MHZ Preparing Pstn calls Preparing test call Deleting send message Sending prepared messagesSending without modification Editing before sending Printing List of Send Message Files Manual Entry of Position and TimeDeleting all messages After last digit Date/Time setup Date and Time SettingMemory Clear Memory clear Clearing received distress log Clearing received ordinary logClearing transmitted log Restoring to default setting Setting AlarmsClearing user channels Sound setup Sound Setting OFF Hook Setting the Auto ACK Details Sample printouts Printing Messages Distress and safety frequencies Routine frequencies Scan freq setup Key Assignment Key assign setupSpecial Messages Speaker Setting in Off Hook FAX Enable/DisableOperation Timer Off This page is intentionally left blank Turning on the Nbdp System Nbdp System OverviewNbdp terminal unit, printer and keyboard Description of Equipment Features of the IB-583Terminal unit Communication status display Keyboard for IB-581 KeyboardKeyboard for IB-583 Menu conventions Function Keys, Menu OperationInverse video Underline Selecting menus Menu overviewFile menu Selecting menu items and options Function key description Undo Function key F2 Edit menuCut Copy Timer Operation Cancel SendingFunction key F3 Operate menu Call Station Function key F4 Window menu Or month, choose item with ↑ or ↓ key and change settingWindow menu Displays desired calendar month and year. To change year Function key F5 Station menu Timer Operation EntryStation Entry Scan Entry Slave Delay SetupFunction key F6 System menu TX/RX MSG Save Function key F10 Break Disconnects the line Cursor is choosing Window Color Setup press the Enter key Registering Answerback Code & ID Codes Nbdp PreparationsRegistering answerback code Answerback code entry screen Message for confirmation of code entered Registering ID codesIf the code is correct, press the Enter key again ID code entry screen Registering stations Station List Editing/Deleting stations OK/Cancel promptScanning group list Registering timer programs Timer ProgrammingTimer operation entry screen 3 5 0 User channel entry screen Editing/Deleting timer programs Editing/Deleting user channels Scan Channel GroupsRegistering scan channel groups Scan entry screen Press the Enter key twice Press the ESC key Editing/Deleting scan channel groups Opening and Closing Files Nbdp File OperationsCreating Files How a file is opened Formatting floppy disks Saving a File Saving a file Editing FilesCutting and pasting text Close text screen Cutting text Copying and pasting textHighlight Pasting text Select all Copy and paste flow diagramSearching text Search screen Goto line Replacing textGoto top, Goto bottom Replace screen Opening Files Switching between filesRenaming Files Opening a file Deleting Files Saving a File Under a New NameReal Time Printing Printing Files Manual Calling Nbdp TRANSMITTING, Receiving10-1 Set frequency screen Manual calling screen 10-2 10-3 ARQ Mode OperationEstablishing connection Press the 1 key to choose Call Station Transmit message by one of the following methods 10-4Sending a file stored on a floppy disk Send file screen Choosing Receive Mode FEC Mode Operation10-5 Stopping transmission 10-6 Communication ExampleCommunications example Table of abbreviations 10-7 Enabling timer operation Timer OperationCommand and abbreviation Timer operation list Scanning Stopping timer operation10-9 Preparing Macrofiles for Automatic Telex Communication BufferAutomatic telex overview 10-10 10-11 PreparationsRegistering answerback code Registering scan groups Command Parameter Content CommandsCommands processed by Danish coast station Lyngby Command Function Store-and-forward method Actual procedure for store-and-forward telex10-13 Sample macrofile for store-and-forward method 10-14Close text prompt 10-15 Dirtlx macrofileSample Dirtlx macrofile Sample Dirltx macrofile 10-16 Procedure for Dirtlx Basic procedure Automatic Telex using MacrofileActual procedure 10-17 Call macro screen 10-18Press the ↓ key to choose a macrofile Press the Enter key Radiotelephone Test Maintenance & Troubleshooting11-1 11-2 Maintenance 11-3 Simple Troubleshooting Error messages Error Messages11-4 11-5 Replacement of Fuses 11-6 Test Call Do the either way depending on the message shown in step 11-7Test acknowledge message received Nbdp Terminal Unit Maintenance System menu Example IB-583 11-9Self test results Tone test Tone test 2 Fox 11-10Tone test 3 Beta Menu Tree AppendixAP-1 AP-2 Nbdp terminal unit telex AP-3 Frequency TablesTX kHz RX kHz Remarks File Name 14. = Ship-to-ship AP-4 Custom channels to be programmed by Furuno dealers AP-5 MF band working carrier frequencies ref. US CFR 47 Part AP-6 MF band SSB working carrier frequencies AP-7 MHz ITU SSB carrier frequencies ITU RR Appendix AP-8 AP-9 12/16 ITU SSB carrier frequencies ITU RR Appendix AP-10 18/19, 22, 25/26 ITU SSB carrier frequencies ITU RR Appendix AP-11 MF band telex frequency table Frequency /4 AP-12 ITU Telex frequency /4 AP-13 AP-14 ITU Telex Frequency /4 AP-16 Telex Abbreviations Sentences Digital Interface IECAP-17 Input sentences IEC GLL Geographic position latitude/longitude AP-18ZDA Time and date GNS Gnss fix data AP-19 RMC Recommended minimum specific GPS/TRANSIT data AP-20 AP-21 Schematic diagram AP-22 Parts ListTransceiver unit FS-1570T Transceiver unit FS-2570T AP-23 Control unit FS-2571C AP-24 Control unit FS-5070T AP-25 FS-1570T Parts LocationAP-26 AP-27 Transceiver unit FS-2570T AP-28 Transceiver unit FS-5070T Comb AP-29 AP-30 Control unit FS-2571C FS-1570/2570/5070 Specifications of SSB Radiotelephone DSC/WATCH Keeping Receiver DSC/WATCH Receiver FS-5070 Terminal Unit IB-581 FS-1570/2570 Nbdp Function Option Antenna Coupler FS-5070 Antenna Coupler FS-1570/2570 Coating Color Distress relay Index IN-2 0560 Publication No. DOC-1028 0560