Furuno FS-5070 manual Choosing Channel, Frequency, Choosing channel

2. SSB RADIOTELEPHONE

2.2Choosing Channel, Frequency

Choose the channel or transmitting frequency to use for the SSB. This setting can be done both when the handset is on and off hook.

Note: To set the SSB radiotelephone to 2182 kHz/J3E, press the RT/CH key more than five seconds.

Choosing channel

1.Rotate the ENTER knob to choose CH and then push the ENTER knob. You can show the channel window by pushing also 1/CH key.

	CH:
				200		kHz
	Tx:
	Rx:
			2182.00 kHz
SSB SIMP HIGH FAST NB SQ
SEN					S
IA				10.0A
MMSI xxxxxxxxx							UTC 00:00
POS 35		00.0000N
135		00.0000E					EPFS 23:59

2.Channel can be entered directly with the numeric keys, or by using the ENTER knob. See below for details.

Entering band and band channel with the numeric keys: Use the numeric keys to enter band and band channel and then push the ENTER knob.

Choosing band and band channel with the ENTER knob:

After showing the window, use the FILE/CURSOR key to place the cursor in the band or band channel position, whichever you want to change.

200

200

Cursor position for	Cursor position for
selection of band channel	selection of band

3. Rotate the ENTER knob to set band (or channel) desired.

2	4 6	8 12 16 18 22 25	01 02----- 029
		ITU band	User band
Setting Range
ITU	Band:	2/4/6/8/12/16/18/22/25
User Band:		001-029 (First zero is necessary)
ITU Channel:		XX01 - XX236 (rendering on band or mode)
User Channel:		XXX01 - XXX99

4. Push the ENTER knob. The Tx and Rx frequencies of the channel entered appear.

2-2