Furuno FS-5070 manual Commands, 10-12, Command Parameter Content, Command Function

10. NBDP TRANSMITTING, RECEIVING

10.9.3Commands

The tables which follows describe the commands for macro operation

Command			Parameter	Content
(Prefixed with @)
CALL			S: Station Name	Calling station name and ID on assigned
				parameter
FREE (support			Two digits, 0-99 min.	Free-signal searching time according to
command for CALL)				assigned parameter (default setting: 10
				min)
			$RRR$ signal	Detect free signal of dot pattern
RETRY (support			Two digits, 0-99 min.	Calling according to assigned parameter
command for CALL)				(default setting: 10 min)
CASE			Text	For receiving a message (designated by
				parameter) transmitted by coast station
TIMEOUT (support			Two digits, 0-99 min.	Time allotted for reception of message by
command for CALL)				CASE command
SEND			Text	Text transmitted according to assigned
				parameters
			A: file name	Send a file from floppy disk
WRU			None	Function keys F7 – F10
HR
OVER
BREAK
DISPLAY			Text	Text of message appears
INPUT			None	Waiting for keyboard input
				Transmit keyboard input message
Commands processed by Danish coast station Lyngby
Command		Function
BRK+		Disconnection communications line
DIRTLX ……+	Direct dialing telex (receive only)
KKKK		Terminate message
LTR+		For telex letters mailed from Operations Station to destinations worldwide
MED+		Request medical advice
OPR+		Requesting operating assistance
POS+		Send position data
STA+		Status requested on a store-and-forward message
TLX ……+		Store-and-forward method

For details, consult the coast station’s traffic manual.

10-12