Furuno FS-5070 manual Function key F6 System menu, Setup, Slave Delay, TX/RX MSG Save, Time System

7. NBDP SYSTEM OVERVIEW

Function key [F6]: System menu

The System menu is mainly for use by technicians and contains diagnostic tests. To change settings, choose “Change” from the item “Setup” and operate arrow keys to choose item and option. Press the Enter key to register selection and close the menu.

			System
	Setup		Lock Change Default
	Slave Delay		8 msec (0- 50 msec)
	TX/RX MSG Save		OFF O N
	Edit Before sending		OFF O N
	Time System		OFF UTC SMT JST
	Time & Date	2002/10/16 10:00:00
	Window Color*
	Self Test
			*: Display mode" shown on IB-581
		System menu
Setup	Locks, changes settings; restores default system settings.
Slave Delay	Sets the length of the slave delay timing from the end of RX to
	the start of TX in the ARQ mode. The default setting is suitable in
	most cases. This item cannot be adjusted by the user.

ARQ mode	3 char. RX
signal
sequence	Slave Delay Timing

3 char. RX

ACK signal

	RX end	TX start
TX/RX MSG Save	Turn on to automatically save incoming and outgoing messages to
	a floppy disk. “Log” appears at the top of the screen when on.
Edit Before sending	“OFF” transmits keying operation one by one. “ON” transmits
	message only when the Enter key is pressed after confirming text
	typed.
Time System	Chooses time system.
	UTC: Coordinated universal time
	SMT: Local time
	JST: Japan standard time.
Time & Date	Enter date and time manually. If a navigation device is connected,
	the time is automatically set when the power is turned on or
	whenever the time system is switched. Manual entry takes priority
	over automatic entry. This item cannot be adjusted when using
	JST or UTC.

7-11