Chapter 5: SAN LUN Mapping
6 Enter a new SAN LUN mapping name, then press ENTER. The Modify SAN LUN Mapping Configuration screen opens.
7 Change the parameters for the SAN LUN Mapping. Set the parameters for the SAN LUN Mapping by using the ENTER key to toggle the type of access desired (shared, shared read only, exclusive, or NA). Press the left or right arrow keys to change the LUN number and the up or down arrow keys to cycle through the logical drives.
If a logical drive is already part of another mapping, and is defined as Exclusive, it will not be available here for selection. If the logical drive was mapped as Share or Shared Read Only, it will be available.
Press CTRL + D to move to the next menu.
8 You are presented with modifying the controller LUN for the mapping. You can choose to leave the property in the automatic mode, or set an exclusive Controller LUN number for this mapping by choosing User Defined and entering a new LUN number.
Press ENTER to change the mode. If you selected User Defined, use the up or down arrow keys to change the Controller LUN number.
Press CTRL + D to move to the next menu.
106 | www.gateway.com |