Creating arrays

Important You must initialize the array before using the logical drives created from the array.

13 Save the configuration to create the array. Click Yes, then press ENTER. You will see a message that the configuration is being saved.

14 After it has completed the process, press any key to continue.

15 Continue with setting up the Array Read-Ahead Cache and Writeback Cache, then go to the Hot Spare drives options.

Tips & Tricks

After you have completed these tasks, go to the next

 

chapter. Create the logical drives and perform the LUN

 

assignment to complete the setup. Additionally, for more

 

control over the logical drives, see “SAN LUN Mapping” on

 

page 89 and perform your appropriate mappings.

 

 

www.gateway.com

35