Gateway 840 VT-100 manual 186

			Controller events
Controller Event Messages	Description	Cause	Action
Controller Shutdown	The controller has been	User initiated a	No action
	shutdown either locally or	controller	necessary.
	remotely.	shutdown.	Check for a failed
		The controller	fan, replace as
		temperature was	needed. Check for
		exceeded and the	blocked air flow,
		controller shut	correct as needed.
		itself down.	Check for high
			ambient
			temperature,
			reduce the
			environments
			ambient
			temperature.
Controller Selftest Passed	The controller has	Selftest	No action
	completed its power on	completion on	necessary.
	selftest.	startup.
Controller Selftest Failed	The controller has failed its	Selftest failure on	Replace the
	power on selftest.	startup.	controller.
Controller Firmware	The controller’s firmware has	User upgraded the	No action
Upgraded to version xxxx	been upgraded to the	controller	necessary.
	indicated version.	firmware.
Configuration Changed	The configuration has been	A change in the	If you are using the
	changed.	configuration has	Save
		occurred.	Configuration
			feature, re-save
			your configuration
			information - it no
			longer matches.
			Otherwise no
			action is
			necessary.
DMA Error	This indicates an internal	Internal hardware	Replace the
	error in the controller.	failure.	controller. Contact
			Technical Support.
Event Log Cleared	The controller’s event log	You have cleared	No action
	has been erased.	the event log.	necessary.
Fatal Watchdog Error	The controller watchdog	Internal hardware	Replace the
	timer has detected a fatal	or firmware failure.	controller. Contact
	hardware or firmware error.		Technical Support.

www.gateway.com 181