Configuring hot spares

4 Press the arrow keys to select an available drive to use:

To add a dedicated spare, press S to assign that drive as a dedicated spare. Then continue to press S, which displays the arrays from which you can assign the dedicated spare.

To add a drive as a global spare, press the arrow keys to select an available drive, then press H key.

To remove a drive as a hot spare, select the drive, then press R, or press C to remove all drives in the enclosure that are currently assigned as spares. After the changes have been made, press the CTRL + D to continue.

5 When you are prompted to save the changes, press Y to save the new hot spare configurations.

6 Press any key to continue.

www.gateway.com

123