Gateway 840 VT-100 manual 187

Chapter 9: Event Logs

Controller Event Messages	Description	Cause	Action
Fatal SDRAM ECC	The controller has detected	Fault SDRAM or	Replace the
	unrecoverable ECC errors	damaged internal	controller. Contact
	on the SDRAM, either a	bus.	Technical Support.
	multiple-bit error or
	uncorrectable single-bit
	error.
Fatal Coprocessor Error	The coprocessor has failed.	Internal hardware	Replace the
		or firmware failure	controller. Contact
		on the	Technical Support.
		coprocessor.
Fatal Host Port x Error	The controller has detected	Memory or bus	Replace the
	a fatal error on the indicated	error on the	controller. Contact
	host channel.	indicated channel.	Technical Support.
Fatal Drive Port x Error	The controller has detected	Memory or bus	Replace the
	a fatal error on the indicated	error on the	controller. Contact
	drive channel.	indicated channel.	Technical Support.
Flush Mirrored Cache	After failover, mirrored	Failure or removal	No action
Started, xxx Entries, yyy	writeback cache needs to be	of the partner	necessary.
MB	flushed to the drives. This	controller.
	indicates the start of that
	process.
Flush Mirrored Cache	The flushing of mirrored	Completion of	No action
Completed	writeback cache after a	mirrored cache	necessary.
	controller failure has	flushing.
	completed.
Flush Cache Started, xxx	If the controller is powered	Failure of power	No action
Entries, yyy MB	off with writeback cache still	with writeback	necessary.
	present, it is necessary to	cache present.
	flush this data when power is
	restored. This indicates the
	start of that process.
Flush Cache Completed	The flushing of writeback	Completion of	No action
	cache after a power failure	cache flushing.	necessary.
	has completed.
Recovered SDRAM ECC	The controller has detected	SDRAM error.	If it repeats,
Error, Address: xxxxxxxx	and corrected a single bit		replace the
Bit: yy	ECC error in the SDRAM.		controller.
	The address and error bit are
	indicated.

182 www.gateway.com