Chapter 9: Event Logs

Enclosure events

These events are related to the SES monitored enclosure components.

SES Event Messages

Description

Cause

Action

 

 

 

 

Encl.yy Power supply zz

The controller has detected

Normal condition

No action

OK WWN: xx xx xx xx xx xx

that the indicated power

reported.

necessary.

xx xx

supply is functioning

 

 

 

correctly.

 

 

 

 

 

 

Encl.yy Power supply zz

The controller has detected

The specific power

Replace the power

Critical WWN: xx xx xx xx

that the indicated power

supply has failed.

supply.

xx xx xx xx

supply is not functioning.

The specific power

Make sure that the

 

 

 

 

supply is powered

specific power

 

 

off.

supply On/Off

 

 

 

button is in the On

 

 

 

position ( l ).

 

 

 

 

Encl.yy Power supply zz

The controller has detected

The power supply

Re-insert the

Not Present

that the indicated power

was removed.

power supply,

WWN: xx xx xx xx xx xx xx

supply is not present.

 

connect the power

xx

 

 

cord, and power

 

 

 

on the power

 

 

 

supply.

 

 

 

 

Encl.yy Fan zz OK

The controller has detected

Normal condition

No action

WWN: xx xx xx xx xx xx xx

that the indicated fan is

reported.

necessary.

xx

functioning correctly.

 

 

 

 

 

 

Encl.yy Fan zz Critical

The controller has detected

A specific fan

Replace the

WWN: xx xx xx xx xx xx xx

that the indicated fan is not

failure.

cooling fan

xx

functioning.

Total fan failure.

module.

 

 

 

 

 

Cooling fan

Replace the

 

 

cooling fan

 

 

module was

 

 

module.

 

 

removed.

 

 

 

 

 

 

Re-inset the

 

 

 

cooling fan

 

 

 

module.

Encl.yy Temp. zz <aa>C OK WWN: xx xx xx xx xx xx xx xx

The controller has detected

Temperature

No action

that the indicated

sensors are

required.

temperature sensor is within

reporting normal

 

limits.

temperatures in

 

 

the enclosure.

 

192

www.gateway.com